Assessment of RC Tall & Multi Storey Building using Software Mechanism such as Staadpro and CSI-Etabs: A Review

Authors

  • Arvind Vishwakarma 8839873776
  • Lalit Balhar Oriental University Indore

Keywords:

Staad.pro, CSI-Etabs, Tall, Multi storey, RCC.

Abstract

Recently the most versatile used software’s in Indian Market are both Staadpro and E-tabs. Many of the researchers who are working in different companies and organization make efficient use of this software’s. The proposal and checked procedure of Government body are also willing to check by staadpro and CSI-Etabs software’s. With the time frame it is easy to get result through software rather than the manual calculation in the current scenario. The economical design of a building is main aim of a Civil Engineer so a different trial has been made to reach out to extent of design standards using these software’s.

        The current project deals with the examiner of Tall & Multi storey RCC building frame design on account of dynamic l loads acting in the laterals direction  such as earthquake & wind. The software used for the study is Staadpro and csi-Etabs. The main objective is not only to test the accuracy of the software’s but also to make buildings with resistant free from the failures & what are output gets by it so that we make the building technical fit & serviceable.

Keywords:  Staad.pro, CSI-Etabs, Tall, Multi storey, RCC.

References

[1]. M. sabeer,D & Gouse Peera (2015) “Comparison Design Result Of Rcc Building Using Staad And Etabs Software” International Journal of Innovative Research in Advanced Engineering (IJIRAE) Issue 8, Volume 2.

[2]. A. Sivaji & N. Madhava Reddy (2019)“Analysis & Design Of Multi-Story Building Using Staad Pro And E-Tabs” International Journal of Management, Technology And Engineering (IJMTE) Issue 1 ,Vol 9.

[3]. Isha Bedi, Girish Sharma & et, al.(2017) “Comparative Study Of Rcc Frame Structures Using Staad.Pro, Etabs, And Sap” International journal of advance research in science & Engineering . Issue 9,Vol 6.

[4]. M. P Tayade. & M. R. Vyawhare(2017) “A Comparative Study Of Stress Parameters Obtained By Staad-Pro And Etab” International journal of research in applied science & Engineering Tcehnology (IJRASET) . Issue 2,Vol 5.

[5] Sv. Bhaskar Reddy and V.Madhu(2018) “Comparative Study On Design Results Of A Multi-Storied Building Using Staad Pro And Etabs For Regular And Irregular Plan Configuration” International Journal of apllied Engineering research Issue 15,Vol 13.

[6]. Mohammad Kalim, Abdul Rehman, B S Tyagi(2018) “Comparative Study on Analysis and Design of Regular Configuration of Building by Staadproand Etabs” International Research Journal of Engineering and Technology (IRJET) Issue 03,Vol 5.

[7]. Lalit Balhar, Dr. J.N. Vyas(2019) “Comparative Analysis Of Flat Slabs & Conventional Rc Slabs With And Without Shear Wall”, International Research Journal of Engineering and Technology (IRJET) Issue 01,Vol 6.

[8]. Lalit Balhar, Dr. J.N. Vyas, “review paper on comparative analysis of flat slabs & conventional rc slabs with and without shear wall”, International Research Journal of Engineering and Technology (IRJET) Issue 02,Vol 6 (February 2019).

[9]. Arindam Sahu, Rohit Bose & et. al.(2016) “design & analysis of multi-storied building using sap 2000” Journal of Basic and Applied Engineering Research Issue 11,Vol 3.

[10]. Deyuan Zhou, Changtuan Guo & et. al. (2016) “seismic evaluation of a multitower connected building by using three software programs with experimental verification” Hindavi Publishing coorperation shock & vibration (2016).

[11]. Sumukam Sai Charan Raj, Suraj Baraik, Dr. G Venkata Ramana, “WIND ANALYSIS OF HIGH-RISE BUILDINGS USING SAP2000” , International Journal of Civil Engineering and Technology (IJCIET) ,Issue 8, Vol 9 (AUGUST 2018).

[12]. T.Subramani, K.Murali , “Analytical Study of Tall Building with Outtrigger System with Respect to Seismic and Wind Analysis Using ETABS” , International Journal of Engineering & Technology (2018).

[13]. Rajeshwari Patil, Shweta Anoor, Shweta Desai “ANALYSIS AND DESIGN OF RESIDENTIAL BUILDING BY USING SAP-2000, International Research Journal of Engineering and Technology (IRJET) Issue 05,Vol 4 (May 2017).

[14] Arvind Vishwakarma, Savita Maru Assessment on Human Comfort Criteria of Tall Building under Dynamic Wind Loading International Journal of Innovative Technology and Exploring Engineering (IJITEE) ISSN: 2278-3075, Volume-9, Issue-2, December 2019

15. Arvind Vishwakarma, Savita Maru(2019) Assessment on Human Comfort Criteria of Tall Building under Dynamic Wind Loading, International Journal of Innovative Technology and Exploring Engineering (IJITEE) ISSN: 2278-3075, Volume-9, Issue-2, December 2019, pp – 2265-2273. Retrieval Number: B6688129219/2019©BEIESP DOI: 10.35940/ijitee.B6688.129219
16. V.Ramanjaneyulu, Dharmesh.M, V.Chiranjeevi (2018) Comparative Study On Design Results Of A Multi-Storied Building Using Staad Pro And Etabs For Regular And Irregular Plan Configuration International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395-0056 Volume: 05 Issue: 01 | Jan-2018 www.irjet.net p-ISSN: 2395-0072, pp 676-681.
17. Mohammad Kalim1, Abdul Rehman2, B S Tyagi(2018) Comparative Study on Analysis and Design of Regular Configuration of Building by Staadproand Etabs International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395-0056 Volume: 05 Issue: 03 | Mar-2018 www.irjet.net p-ISSN: 2395-0072, pp 1794-1797.

18. Prashanth.P1, Anshuman.S2, Pandey.R.K3, Arpan Herbert4(2010) Comparison of design results of a Structure designed using STAAD and
ETABS Software INTERNATIONAL JOURNAL OF CIVIL AND STRUCTURAL ENGINEERING Volume 2, No 3, 2012 ISSN 0976 – 4399, pp 869-875.

Downloads

Published

2021-08-31

How to Cite

Vishwakarma, A., & Balhar, L. (2021). Assessment of RC Tall & Multi Storey Building using Software Mechanism such as Staadpro and CSI-Etabs: A Review. CSVTU Research Journal, 9(2), 146–153. Retrieved from http://csvtujournal.in/index.php/rjet/article/view/108